Only Dyson purifying fan heaters clean and heat a whole room properly
• Senses particles and gases
• Captures pollutants you can't see
• Diagnoses and reports pollutants in real time
$899.00 inc. GST$817.27 ex. GST
Heats, cools and purifies
To simultaneously purify and heat a whole room properly, the Dyson Pure Hot+Cool™ purifier fan heater goes beyond standard tests. Using Air Multiplier™ technology, it automatically senses pollution, captures 99.95% of ultrafine pollutants,2 and projects purified and heated air throughout your whole room. It is the only purifying heater designed and tested to do this.
Pollutants can build up inside your workspace. But you can't always see them.
In fact, indoor air quality can be up to 5x worse than outdoor air quality.3
Automatically senses and reports particles and gases, in real time
With three intelligent sensors, the Dyson purifier fan heater automatically detects airborne particles and gases
Captures pollutants you can't see2
The fully-sealed filter system combines an activated Carbon filter to remove gases, and a glass HEPA filter that captures 99.95% of microscopic allergens and pollutants as small as 0.1 microns.
Fast, safe, efficient heating
Self-regulating ceramic plates are positioned at the front of the amp, to heat the air as it leaves the machine.
Once your target temperature is reached, the machine automatically stops heating, which saves energy. If the temperature starts to drop, it reactivates to maintain it.
Powerful Air Multiplier™ technology
Air Multiplier™ technology delivers over 290 litres of smooth, powerful airflow per second – circulating purified air throughout the whole room.
Two airflow modes
The machine has two separate apertures, to release air from either the front or back of the machine. The valve mechanism turns a rotational baffle around the arc of the amplifier, to switch the direction of the airflow.
Heats in winter. Cools you in summer
With long-range, purified heat projection it's quick to heat the whole room evenly.1
View temperature and air quality reports, fast
The Dyson Link app4 allows you to monitor the air quality in your business, and outdoors. Quickly check your machine's activity, past and present, as well as reports on temperature, humidiity, and filter life.
Delivers a powerful stream of cooling, purified air from the front of the machine.
The machine diverts air through the rear annular at a 45° angle, creating a more diffused airflow.
Oscillates up to 350°
Adjustable oscillation angle from 45° to 350°, to project purified air around the whole room.
Using a compatible voice service, control your machine with simple, spoken instructions.
Certified asthma and allergy friendly™
This Dyson Pure Hot+Cool™ purifier fan heater is certified asthma and allergy friendly™ by Allergy Standards Limited.
Standby power consumption
27m² (According to POLAR)
One year. (Based on 12hr use a day or 6 months based on 24hr use a day)
Explore the Dyson air treatment range
1 The standard purification and heating performance tests are AHAM AC1-2015 and IEC 60675 respectively. Dyson goes beyond these, by testing filtration efficiency (EN1822), air projection (DTM801), purification coverage in an 81m³ room with multiple sensors (TM-003711) and heating performance in a 35m³ room with multiple sensors (DTM 961).
2 Tested for filtration efficiency at 0.1 microns (EN1822). Gaseous capture rates vary.
3 Hulin et al, Respiratory health and indoor air pollutants based on quantitative exposure assessments, European Respiratory Journal, Oct. 2012.
4 Requires device to run app, 2.4GHz or 5GHz Wi-Fi connection or mobile data, Bluetooth 4.0 support, and iOS version 10 or Android version 5.1 (or above). Standard data and messaging rates may apply.
Quiet Mark is a registered trademark of the Noise Abatement Society.
Asthma & allergy friendly™ and the certified asthma & allergy friendly™ mark are Registered Certification Marks of Allergy Standards Limited.